2025 Landini Trekker3 Compact 3-085 S

Current Landini Crawlers Trekker3 Compact

Swipe to View More

Year 2025
Make Landini
Model Trekker3 Compact

Year 2025
Manufacturer Landini
Model Name Trekker3 Compact
Trim Name 3-085 S
Generic Type (Primary) Compact
Engine Manufacturer Kohler
Engine Type KDI 2504 TCR | Valves: 16
Engine Power max (ISO): 75 / 55 hp / kW
Engine Torque Max torque: 315 Nm
Displacement 2500 cm3
Emissions Stage V
Cylinder Liners 4

Landini expands its range of crawler tractors with the innovative Trekker3 Compact, a tracked tractor specially designed for use in narrow-row orchards and vineyards. Compact, nimble and efficient, the Trekker3 Compact will tackle tough terrains and steep inclines with ease, reaching where conventional tractors cannot reach. This new range consists of a single 3-085 model available in two versions: COMPACT and COMPACT S. The difference is the width of the soles. In the COMPACT version the width in mm is 280 - 310 (steel) / 300 (rubber) while for COMPACT S it is only 250 mm, with this configuration the soles are only available in steel.

Features may include:

Kohler engines

The new super compact STAGE V KOHLER KDI 2504 2.5-litre, 75-hp, four-cylinder turbo aftercooled engine with common rail injection system is designed for maximum efficiency and long-lasting performance.

Speed Four transmission

The rugged Speed Four transmission with synchro shuttle offers four synchronised gears and two mechanical ranges. The creeper provides up to 16 FWD + 8 REV gears and allows a minimum speed of 300 m/h.

Driving position

The platform is suspended on Hydro silent blocks to isolate the driving position from engine heat and to reduce vibrations generated by rough terrain and mechanical parts, ensuring a level of comfort never before achieved.

Engine

Engine Manufacturer Kohler

Engine Type KDI 2504 TCR | Valves: 16

Engine Power max (ISO): 75 / 55 hp / kW

Engine Torque Max torque: 315 Nm

Displacement 2500 cm3

Emissions Stage V

Cylinder Liners 4

PTO

PTO Type Rear: Servoassisted dry clutch | Rotation: Clockwise (rear view) - 1-3/8” PTO shaft with 6 splines

PTO Power, Rated Engine Speed Rear: 540 / 540E Rpm

Drivetrain

Drive System Platform type: ROPS w/central tunnel w/side gears and reverse shuttle commands

Steering Hydrostatic Hi-Drive | Control: Single lever operating left/right independent clutches and brakes

Clutch Reverse: Mechanical

Transmission Speed Four | Control: Manually operated - 11” independent dry clutch

Gears 16+8 with “Underdrive”

Suspension

Suspension Front: Leaf spring | Rear: Crossbar on independent track frames

Brakes

Brake System Type Hydrostatic wet multidisc graphite brakes

Operational

Operating Speed Minimum: 300 m/h (w/creeper) | speed at 30 km/h: 2600 rpm

Hydraulics

Hydraulic Pump Hydraulic circuit type: Open centre - dual pump

Hydraulic Type Rear: Mechanical with position/draft/intermix/floating control | Circuit type - pump type: open center - twin pump | Rear remote valves: 2 | Free flow return

Maximum Pressure 180 bar

Steering Pump Flow Flow rate hitch & remotes + steering: 50 + 30 l/min

Chassis

Hitch/Type Cat.1 / Cat.2 - fixed ball ends

Chassis Front Axle type: rigid 4WD

Dimensions

Wheelbase 1350 mm

Ground Clearance 220 mm

Height 2200 mm (2486 w/top beacon light) Min-max over ROPS

Length Min length without front weights: 3050 mm

Overall Width Max: 1150 mm

Track Width 900 mm | Shoe: 250 mm (metallic)

Capacities

Fuel Capacity Tank: 45 l

Hitch Lift Capacity Rear: 2600 kg

Weights

Weight, As Shipped 3150 kg

GVWR 3050 kg

Weight Front: 2x30 / 4x30 kg

Features

Construction Material Track shoe type: Metal

Features Track tension adjustment system: Hydraulic track tension adjuster with permanently lubricated sprocket gear | Top track carrier roller: Sealed and permanently lubricated | Front weight: support Structural | Bottom track carrier rollers: 4 sealed and lubricated

2025 Landini Trekker3 Compact 3-085 S